ISO13485 WP 5.7mm BioHorizons Internal Ti Base Abutment
BioHorizons® Internal Titanium Ti-Base Abutment Compatible
3.0mm/ NP 3.5mm/ RP 4.5mm/ WP 5.7mm
Material:
Ti 6AI-4V ELI (Supply from Germany)
Feature:
* Titanium interface abutment
* 1pc Screw Included
* Precision machined up to ± 5µm
* Combination of high fatigue strength
* Superior level of biocompatibility
* Exterior retentions for more cementation bonding
Specific design ensures a stable union, reinforcing the structure
of zirconium in the areas of greatest stress, softening edges and
ensuring the service life of the prosthesis.
Furthermore, the saving is also shown in the less time needed when
working on the most sensitive part of the prosthesis, the
adjustment with the implant.
Approved by CE, ISO 9001, ISO 13485
Points of Biohorizons Tapered internal, Internal Titanium Abutment:
Fig. 5
Titanium abutments are color coded (yellow 3.5mm, green 4.5mm and blue 5.7mm) at the
implant/abutment interface surface for identification purposes and
each abutment is sold with a 0.050 (1.25mm) hex screw. The 3inOne
abutment (Fig.5, top left) supplied with most implants can be used
as a final abutment. Esthetic straight, esthetic angled (Fig.5,
bottom) and the 3inOne abutments have a gold colored titanium
nitride coating to lessen the chance of a dark shadow under thin
tissue. A sloping collar design is machined in to both esthetic
abutments whereby the preangled abutment is angled at 15 degrees.
The angulation is machined in relation to the flat side of the
indexing feature (hex).
