Nobel Active Impression Coping Closed Tray Conical

Connection RP Ø 6 x 9mm/13mm (36544/36545)

Material:

Ti 6AI-4V ELI (Supply from Germany)

Reference Number:

36544

36545

Feature:
- Titanium interface abutment
- Precision machined up to ± 5µm
- Combination of high fatigue strength
- Superior level of biocompatibility
- Exterior retentions for more cementation bonding

Approved by CE, ISO 9001, ISO 13485

NobelActive™

Fig. 3

Direct impression copings designed for the open tray impression technique are produced in two emergence profiles for NP platform implants (Fig.3, top row) and three emergence profiles for RP implants (Fig.3, bottom row). NP impression copings are produced in one height of 14mm while RP impression copings are available in two heights, 14m and a low profile version of 10mm. Emergence profiles for NP impression copings are machined in 3.6 and 5.0mm. RP impression copings are offered in three emergence profiles of 3.6, 5.0 and 6.0mm Only NP (3.5mm) platform impression copings are color coded for identification (fuchsia). A Unigrip™ driver may be used to service the fixation screw for impression copings.

NobelReplace™, Replace™ Select, NobelSpeedy™ Replace

All of the implants in this product group are machined with a internal indexing feature in four implant/abutment platform diameters of 3.5, 4.3, 5.0 and 6.0mm. The indexing feature (Fig.12) consists of a tri-lobe design of platform diameter specific dimensions, making prosthetic components incompatible from platform diameter to platform diameter. Each platform diameter is color coded for easy platform diameter identification. 3.5mm platform implants are color coded fuchsia and identified as narrow platform (NP). 4.3mm platform implants are color coded yellow and identified as regular platform (RP). 5.0mm platform implants are color coded blue and identified as wide platform (WP). 6.0mm platform implants are color coded green and without any further identification designation.

NobelReplace™ implants are offered in two body geometries, parallel (Fig.13, left) and tapered (Fig.13, right). Both geometries surface treated area extends uniformly from the edge of the implant/abutment platform to the apical and a diminishing thread depth towards the apical of the implant. A small secondary groove is fashioned underneath the main V shaped threads to enhance initial stability. The tapered version is machined without cutting flutes (Fig.16) at the apical portion while the parallel version is produced with cutting flutes (Fig.14) . All four platform diameter tapered implants are available in four advertised lengths of 8,

10, 13 and 16mm. Although each tapered implant is actually 0.6mm longer than advertised. 3.5mm platform parallel wall geometry implants are produced in four (10, 11.5, 13, 15mm) lengths while all other platform diameter implants are offered in one additional length of 18mm. Although each parallel implant is actually 0.6mm longer than advertised. There are no parallel wall 6.0mm platform diameter implants available.

Replace™ Select implants are offered in two body geometries, parallel (Fig.15, left) and tapered (Fig.15, right). Both geometries have a machined collar of 1.5mm and are surface treated below the collar, extending to the apical. A V shaped thread pattern is common to both body geometries with a diminishing thread depth toward the apical of the implant. The tapered version is machined without cutting flutes (Fig.16) at the apical portion while the parallel version is produced with cutting flutes (Fig.14). All four platform diameter tapered implants are available in four advertised lengths of 8, 10, 13 and 16mm. Although

each tapered implant is actually 0.6mm longer than advertised. 3.5mm platform parallel wall geometry implants are produced in four (10, 11.5, 13, 15mm) lengths while 4.3 and 5.0mm platform diameter implants are offered in one additional length of 18mm. Although each parallel implant is actually 0.75mm shorter than advertised. There are no parallel wall 6.0mm platform diameter implants available.

         ANGELS Dental Implant Solutions Center is one of the national high-technique enterprise and one of the professional milling center in China, which offers the dentists the best solutions of the highest quality and accuracy in implantology. We integrate R&D, manufacture and sales, and mainly engages in dental implant system, implant surgical tools and digital implant repair products.

        Our focus is on Being a reliable and reputable dental implant parts manufacturer and improving the lives of patients and dentists around the globe by providing complete top quality, innovative and affordable solutions that exceed standards of excellence in the rapidly growing field of dental implantology.

        Our products have passed the test and certification of the German TUV testing agency, and have the ISO13485 certificate. The raw materials used are all major brands in Germany and the United States, which can guarantee better quality, so you have no worries. We have more than 10 precision machining machines, which can respond quickly and meet your order requirements.